How to use a vacuum pump

Vacuum pumps to enhance members

Many men think about penis improvement, but the methods they know are a bit scared.In medicine, there are tools such as vacuum pumps.

It is used for operation on the men's genitals to maintain penis size.

How is the pump acting

The principle of operation is relatively simple.With the help of a vacuum around the penis, poor pressure occurs, causing stimulation of blood circulation.Therefore, the tissues are filled with blood, which is rapid increased and penis hardening.The same phenomenon in medicine is called hyperemia.

During the stand, the penis is poured with blood, from this, they swell hard.The vacuum pump stimulates the ship and allows you to maintain a member size of 30 to 60 minutes.Also, this device can be used instead of massage.

Pressure in the flask develops the body -the cave, significantly improves blood flow and penis size.Members after the pump look better than with normal fun.

Do not abuse a vacuum pump while in use.Genitals will not be more than this should be, but bleeding, bruises and other complications may occur!

Variety

Automatic vacuum pump with monitor installed

All vacuum pumps have the same design, not taking into account their principles of action.A ship where the male organ is located is a plastic flask with parts.Together with it, in the set there is a seal and pear nozzle, which pumps the pressure in the flask.

There are devices with additional devices: pressure adjustment buttons, manometers, valves to reset.

In the manual air is pumped and removed with pear or piston.Their applications are good because they are available for every man who wants to improve their genitals.

In automatic vacuum, it is made using an electric pump that works on the battery.The pressure can be monitored on the installed pressure gauge, and some samples are equipped with a button for absorption force.

Water devices are a more modern choice for male penis improvement.The principle of their actions is based on the fact that non -air, flakes are pumped with water with pumps.Hydraulic bubbles have greater efficiency, and their life is longer.

How to choose a pump?

A hand vacuum pump with a pear

This device is selected according to two criteria: in terms of genitalia and specific tasks.

  • The length of the ship should be at least 2-3 cm larger than the penis in excited state;
  • The flask diameter must be selected 1-2 cm greater than the diameter of the male member during erection;
  • For those who do this for the first time, experts advise using manual excitement, where air pumps are run with pear.

It is best to buy a tool with a transparent bottle to monitor the process, as well as pay attention to the strength of the material.

The advantages and disadvantages of

Vacuum pumps for men not only increase penile size, but also have therapeutic effects.If you use it continuously, the number of men's genitals is increasing over time, and during sexual intercourse, erection is still.This is due to the decline in organ sensitivity.

In addition, men's dignity increases not only long, but also width.

Also, under the influence of vacuum, you can adjust the shape of the male organs, especially if it has curvature.Inside the pump, the penis is held evenly from the edge of the wall, in this way it is straightened.

As a result of improper use:

  • Due to capillary infringement, strange spots arise on the skin of the penis;
  • reduction of ejaculation or erection;
  • numb.
Bananas and centimeters

Efficiency during use

With persistent use, after six months the shape and size of the penis will be unchanged.The results will be more effective if you take medications that increase the release of male hormones at this time.

Members after the pump are up to 3 cm longer, for 6 months to a year.The thickness of dignity increases to 2 cm.

Instructions for use

If a vacuum pump is used for the first time, the process cannot last for more than 5 minutes to avoid unpleasant consequences.Incorrect use can cause impairment of several functions, as well as edema.

To prevent this from happening, the following suggestions must be followed

  • First, the air must be pumped out of the device, this will increase the circulation of blood flow to the penis.Previously, it was necessary to keep the penis lubrication.
  • A penis improvement cannot last for more than 20 minutes.
  • To reduce the pressure on the ship, you need to start the air.To do this, simply press on a special valve placed near the pear.In some models, for this purpose there is a small hole covered with fingers during the procedure.
  • Use the pump
  • After the member has reached maximum violence, you need to wear a ring at its base, which gives too many organs and holds it in erection.
  • If the pump is with a hydraulic pump, then before the procedure it is necessary to bathe with hot water.After that, after 8 minutes, the dignity of men must be placed in a vacuum.The ring should fit the scrotum, thus lowering the pressure in the area.The device is placed in such a way that the distance from the penis to the flask wall is the same from all sides.It is important to do this before the suction time begins.Observing these instructions, injuries can be avoided.
  • To form a vacuum environment, experts advise to create several swinging movements.Then excess water is lowered using a trigger.Sometimes the pump must be pressed several times so that the entire liquid leaves are excess.
  • After the descent of the water, you can rest a little, then proceed to the procedure.If the pressure drops, it must be pumped to the required level.

Men's advantages can be enhanced by using a set of special training, but for this it is necessary to follow all the suggestions for the use of the device.

During the first week, the procedure is performed 10 minutes a day.

In the second week, 15, for the third 10 minutes twice daily.

Fourth - twice daily for 15, fifth to 20 minutes in the morning and 10 pm.

Possible consequences

With improper use of devices, injuries often occur.

  • Due to lymph nodes, swollen rings appear around the head of the penis.Sometimes this problem can occur even with proper use.In such cases, it is best to stop the procedure for a while.
  • As a result of prolonged manipulation or low pressure in the vessel, large lymph flow occurs, forming swelling.
  • Erection deterioration is the most common consequence.
  • With a strong load, changes in skin color may occur.Due to severe discharge, bleeding often occurs, which can be irreversible.
  • Blood vessel bloches are the most rare, but dangerous problems, so it's best to postpone efforts to improve the penis.

Contraindications

The duration of the vacuum environment is determined by cell expansion.Subject to all suggestions for the use of the device, the effect of the pulse is made on the ship.With its improvement, negative pressure occurs, which causes numbness, and one does not feel pain.

The maximum amount of vacuum cannot cause pain, but one effect does not exceed 18 seconds.The daily vacuum manipulation period should not exceed 45 minutes.

Men's penis has the following contraindications:

  • Diabetes mellitus;
  • sexually transmitted diseases;
  • inflammation of the urethra;
  • deterioration of organ function -the excretion of the digestive system;
  • cardiovascular pathology;
  • Risk of blood clotting.

The operation of the device

In order for the device to maintain its suitability as long as possible, it requires special care.Since manipulation is carried out in an intimate place that requires careful compliance with personal hygiene rules, the pump must be treated with antibacterial solution.

Before use, it is recommended to wash a vacuum pump with warm water and soap, and treat all its components with antiseptic.After the procedure, this creation is again sterilized, applied and stored in a clean and dry place.

How to do it yourself?

This device can be useful not only to increase the size of a man's genital organs or healing therapy.

Pumps can be made from improvisation stored in garages or pantry.

Pag homemade from shade

From the cuff pump

Before you start the manufacture, you need to provide all the spare parts and tools that can be used for use.Vacuum pumps are usually made from cars or bike cuff pumps.This is the simplest and most reliable method.

First you need to make the opposite effect of the pump so that it does not supply the air, but instead, pull it out.To carry out such effects, it is necessary to release the pump, turn on the cuff with the back, then install the device.This will create a vacuum environment.

Next, install a check valve for excess air descent.The aquarium compressor valve is perfect for this.It is mounted on the pump hose to prevent the penetration of the air into the pump.For a larger effect, it is advisable to make the sealing.

This method is the simplest, and is designed to create a shallow vacuum environment.Performance is up to 80% pumping air.If you need to make a more powerful pump, you can use a household compressor.

Using a medical syringe

We make a vacuum pump from a regular medical syringe.For this, the following materials will be required:

  • plastic tee;
  • plastic tubes, which should coincide with the diameter of the tee hole and the syringe;
  • two valves from the aquarium compressor;
  • The injection needle (the power of the future device depends on its size).

From the plastic tube, it is necessary to cut three pieces of 10 cm, then attach it to the tee.The joints should be hermetic and remain good so that they do not jump when pressure occurs.Tee with three bouncers should be obtained.

One of them, located in the middle, is attached to the nose of the syringe.At the remaining two ends, it is necessary to install the valve, and one should be opened, the other inside.To avoid confusing, the arrows are usually placed on the aquarium valve that indicates the direction of air movement.

Such devices made of syringes can pump fluid from one container to another.

To carry out the procedure, a production with the valve is lowered into the liquid, and the second in an empty vessel, which needs to be filled.The pump is driven using a piston.